Which parameters determine if a signal is a High-Speed signal?
What do the guys say? Engineers should rely on literature, simulations, and academic facts. On the other hand, when experienced engineers...
top of page
"Which 50 Ohm is better?"
Visit to the Customer Recently, I received requests for help from several prominent and respected customers. One case involved a card...
9
The Physical Causes of High-Speed Signal Propagation Losses
Skin Effect Background It is well known that the characteristic impedance of a transmission line will vary depending on the bandwidth of...
34
Layout Guidelines for High-Speed Boards
Do we need to write them or not? Sometimes, we engineers try to be innovative. This is usually an advantage, but sometimes it can also be...
15
Fiberweave Effect in High-Speed Designs
FR4 - The most common PCB Material. The most common material used to build printed circuit boards (PCBs) is FR4. FR4 employs...
19
Do you always need ODT when working with DDR memory?
Introduction - General information about DDR memories DDR memory is capable of transferring data at very high speeds. For example, DDR3...
28
bottom of page